Loading Cutlery - AEG 5070 User Instructions

Loading Cutlery

Long bladed knives stored in an
1
upright position are a potential haz-
ard.
Long and/or sharp items of cutlery
1
such as carving knives must be posi-
tioned horizontally in the upper bas-
ket.
Take care when loading or unloading
1
sharp items such as knives.
To ensure that all items of cutlery are
completely washed, you should
1. Place the grid insert on the cutlery
rack
2. Place short knives, forks and spoons
in the grid insert with their handles
pointing downwards.
To make the removal of cutlery easier, on some dishwasher models it
is possible to open the cutlery rack.
If you use the grid insert then the
cutlery rack cannot be opened.
To ensure that the cutlery rack can-
1
not open on removal from the appli-
ance, you should always hold both
parts of the two part handle.
0 1. Place the cutlery rack on a table or
work surface
2. Open the two part handle
3. Remove cutlery
4. Close the two part handle.
Operating instructions
15