Table of Contents
Advertisement
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in diameter) you can load
them in the lower basket after moving the upper basket to the higher position.
To move to the higher position proceed as follows:
1. Move the front runner stops (A) of the
upper basket outwards and slide the
basket out.
2. Refit the basket in the higher position
and replace the stops (A) in their
original position.
Attention!
When the top basket is in the higher
position it will only take plates up to
20 cm in diameter and you will not be
able to use the cup racks.
After loading your machine always close the door, as an open door can
be a hazard.
A
RC01
15
Advertisement
Table of Contents
