Electrolux 506033 Specifications

Hot Water Sanitizing Pot and
Pan Washer – 61.125" WT850
Warewashing
Hot Water Sanitizing Pot and
Pan Washer – 61.125" WT850
506033 (WT850M208U)
506034 (WT850M240U)
Short Form Specification
Item No. ___________________________________
Unit to be Electrolux WT850 Hot Water Sanitizing Pot and Pan
Washer. Electrical characteristics to be ____ 208 V or ____ 240 V
three phase operation with three automatic cycles of 6, 10 and
15 minutes using 3.2 gallons of fresh 180 °F final rinse water
per cycle. Rinse temperature and rinse pressure guaranteed by
built-in hot water booster heater and built-in rinse water booster
pump. Washing performance is guaranteed by a 7.0 hp wash
pump, two upper and two lower revolving washing spray arms
as well as lateral spray arms. Wash water pressure can be
regulated between top and bottom washing arms. 304 stain-
less steel construction to include frame, wash tank, booster tank
and side panels.
Covered by Electrolux Platinum Star® Service Program two-year
parts and one-year labor warranty, installation start-up and per-
formance check-up after one year from installation.
Approval: ___________________________________________
10200 David Taylor Drive, Charlotte, NC 28262 • Telephone Number: 866-449-4200 • Fax Number: 704-547-7401
Warewashing
Electric Pot and Pan Washer
61.125"– 208 V
Electric Pot and Pan Washer
61.125"– 240 V
Electrolux Professional, Inc.
www.electroluxusa.com/professional
ITEM # _______________________________________________
MODEL # _____________________________________________
PROJECT NAME # ______________________________________
SIS # _________________________________________________
AIA # _________________________________________________
Main features
• Built-in booster heater sized to raise incoming 120 °F water to 180 °F for
sanitizing rinse. No external booster heater required.
• Unique temperature interlock guarantees required sanitizing temperatures
thereby ensuring that NSF mandated temperatures are maintained.
• Built-in booster combined with built in rinse booster pump for perfect
rinsing performance in terms of sanitization, energy savings (water
temperature always constant during rinse cycle), independent from
water pressure of the network.
• Requires only 3.2 gallons of water per cycle.
• 4 washing programs 6, 10 or 15 minute as well as continuous wash cycle
• Maximum 10 cycles per hour on 6 minute cycle.
• 304 stainless steel construction to include frame, wash tank, booster tank
and side panels.
• Two revolving stainless steel wash arms and two revolving stainless steel
rinse arms, above and below the rack.
• Wash and rinse arms easy to remove without the use of a tool.
• Wash water pressure can be regulated between top and bottom wash arms.
• Side washing arms for extra washing performance.
• Side washing arms, easily removable for cleaning.
• Smooth surfaces and wash tank with rounded corners to facilitate cleaning.
• Primary and secondary strainers for enhanced particle filtering, easy to
remove without having to remove wash and rinse arms.
• Self cleaning cycle.
• Easy access to wash chamber thanks to 180° front opening door.
• Requires limited space for opening thanks to the cantilevered 2 part door.
• Double skin construction with sound insulation for quiet operation.
• State of the art electronic controls with built in programming, self
diagnostic for serviceability.
• Digital read out keeps operator informed as to cycle status and
temperatures.
• Element protection from dry fire and low water.
• Pre arranged for automatic detergent dispensers.
• Height adjustable feet.
• Large stainless steel basket for pots and pans included.
• Two sheet pan insert included.
• Low noise level.
• 97% recyclable by weight.