Regulatory Compliance Standards - Maxtor QuickView 400/500GB Serial ATA Product Manual

400/500gb serial ata
Table of Contents

Advertisement

Reliability
• 1.0 million hours mean time expected until failure (MTTF)
• Automatic retry on read errors
• S.M.A.R.T. 4 (Self-Monitoring, Analysis and Reporting Technology)
• Transparent media defect mapping
• High performance, in-line defective sector skipping
• Reassignment of defective sectors discovered in the field, without reformatting
• Data Protection System to verify drive integrity
• Quiet Drive Technology (QDT)
2.3

REGULATORY COMPLIANCE STANDARDS

Maxtor Corporation's disk drive products meet all domestic and international product
safety regulatory compliance requirements. Maxtor's disk drive products conform to
the following specifically marked Product Safety Standards:
• Underwriters Laboratories (UL) Standard 1950. This certificate is a
category certification pertaining to all 3.5-inch series drives models.
• Canadian Standards Association (CSA) Standard C.22.2 No. 1950. This
certificate is a category certification pertaining to all 3.5-inch series
drives models.
• TUV Rheinland Standard EN60 950. This certificate is a category
certification pertaining to all 3.5-inch series drives models.
• Korean EMC certifications are issued by Radio Research laboratory (RPL),
which is organized under the Ministry of Information and Communications
(MIC). EMC testing includes electromagnetic emissions (EMI) and
susceptibility (EMS). Certified equipment is labeled with the MIC mark and
certification number.
Product EMI/EMS Qualifications:
• CE Mark authorization is granted by TUV Rheinland in compliance
with our qualifying under EN 55022:1994 and EN 50082-1:1997.
• C-Tick Mark is an Australian authorization marked noted on Maxtor's
disk drive products. The mark proves conformity to the regulatory
compliance document AS/NZS 3548: 1995 and BS EN 55022: 1995.
• Maxtor's disk drives are designed as a separate subassembly that conforms to the
FCC Rules for Radiated and Conducted emissions, Part 15 Subpart J; Class B
when installed in a given computer system.
• Approval from Taiwan BSMI. Number: D33019
Maxtor QuickView 400/500GB Serial ATA Hard Disk Drive
General Description
2-3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Quickview

Table of Contents