Resetting Your Seagate Nas - Seagate Business Storage 1-Bay NAS Administrator's Manual

Monitoring and Managing Your Seagate® NAS
• If the original 2-Bay NAS configuration used only one drive, take the drive from the
defected NAS and place it in the new 2-Bay NAS; the NAS should boot automatically.
• If the original 2-Bay configuration used two drives, take the two drives from the defected
NAS and place them in the new 2-Bay NAS; the NAS should boot automatically.
Migrating Data from 4-BAY NAS
A Seagate 4-Bay NAS can be configured with 1, 2, 3 or 4 drives.
Take one or more original drives and move them to another Seagate 4-Bay NAS.
Note: You cannot remove or exchange a drive with a foreign drive or add a new drive.
• If the original 4-Bay NAS configuration used only one drive, take the drive from the
defected NAS and place it in the new 4-Bay enclosure; the NAS should boot
automatically.
• If the original 4-Bay NAS configuration used two drives, take the two drives from the
defected NAS and place them in the new 4-Bay enclosure; the NAS should boot
automatically.
• If the original 4-Bay NAS configuration used three drives, take the three drives from the
defected NAS and place them in the new 4-Bay enclosure; the NAS should boot
automatically.
• If the original 4-Bay NAS configuration used four drives, take the four drives from the
defected NAS and place them in the new 4-Bay enclosure; the NAS should boot
automatically.

Resetting Your Seagate NAS

Follow these steps to reset the Seagate NAS's name, DHCP setting (network mode) and log
in password.
Note: You will need a paperclip or other narrow device to perform this task.
1. Carefully access the back of the server.
2. Ensure that the NAS is powered on and connected to the LAN.
3. On the back of the NAS, find a single small opening. The reset button is inside the
opening.
4. Insert the end of the paperclip into the opening, then press and hold the reset button. Do
not release the button yet.
5. Hold the reset button until the System Status LED on the front of the NAS blinks. This
takes several seconds.
Seagate Business Storage NAS Administrator Guide
Managing Your Seagate NAS
33