VMware VS4-STD-C - vSphere Standard - PC Evaluation Manual page 97

VMware vSphere 5.0 Evaluation Guide –
Volume One
Next, add the VIB "esx-tboot" to "MyNewProfile" as follows:
PowerCLI C:\> Add-EsxSoftwarePackage -ImageProfile "MyNewProfile" –SoftwarePackage
"esx-tboot"
Figure 135. Add-EsxSoftwarePackage esx-tboot
Next, add the VIB "net-e1000e" to "MyNewProfile" as follows:
PowerCLI C:\> Add-EsxSoftwarePackage -ImageProfile "MyNewProfile" –SoftwarePackage
"net-e1000e"
Figure 136. Add-EsxSoftwarePackage net-e1000e
Next, display the available image profiles and confirm that the new image profile "MyNewProfile" has
been created:
Figure 137. Get-EsxImageProfile with MyNewProfile
Next, display the list of VIBs in the image profiles to confirm that only the VIBs identified are included:
Figure 138. Get-EsxImageProfile MyNewProfile VibList
T E C H N I C A L W H I T E P A P E R / 9 7