Using Snapshots; About Snapshots - VMware 4817V62 - vSphere - PC Administration Manual

Using Snapshots

Snapshots are useful when you need to revert repeatedly to the same state but you do not want to create
multiple virtual machines. With snapshots, you can create restore positions in a linear process. You can also
preserve a baseline before diverging a virtual machine in a process tree.
You can use a snapshot as a restoration point during a linear or iterative process, such as installing update
packages, or during a branching process, such as installing different versions of a program. Taking snapshots
ensures that each installation begins from an identical baseline.
This chapter includes the following topics:

"About Snapshots,"

n
"Using the Snapshot Manager,"
n
"Restore a Snapshot,"
n
About Snapshots
A snapshot captures the entire state of the virtual machine at the time you take the snapshot.
Snapshots are useful when you need to revert repeatedly to the same state but you don't want to create multiple
virtual machines.
A snapshot includes the following information:
Contents of the virtual machine's memory
n
Virtual machine settings
n
State of all the virtual machine's virtual disks
n
N VMware does not support snapshots of raw disks, RDM physical mode disks, independent disks, or of
OTE
virtual machines configured with bus-sharing.
If you require bus-sharing, consider running backup software within your guest operating system as an
alternative solution. If your virtual machine currently has snapshots and it is preventing you from configuring
bus-sharing, delete the snapshots.
Snapshots operate on individual virtual machines. In a team of virtual machines, taking a snapshot preserves
the state only of the active virtual machine.
When you revert to a snapshot, you return all these items to the state they were in at the time you took that
snapshot. If you want the virtual machine to be suspended, powered on, or powered off when you launch it,
make sure that it is in the correct state when you take that snapshot.
While snapshots provide a point-in-time image of the disk that backup solutions can use, do not use snapshots
for your own virtual machine backups. Large numbers of snapshots are difficult to manage, take up large
amounts of disk space, and are not protected in the case of hardware failure.
VMware, Inc.
on page 201
on page 204
on page 205
17
201