Nintendo NTRGUBRP Instruction Booklet page 25

CONFIGURATION METHOD :
CONFIGURING THE SETTINGS BY SEARCHING FOR AN ACCESS POINT
NINTENDO WI-FI NINTENDO WI-FI
CONNECTION
CONNECTION
SETUP SCREEN
SETTINGS SCREEN
Tap the NINTENDO Tap an UNCONFIGURED
WI-FI CONNECTION
connection.
SETTINGS Panel.
You do not need to input the WEP key (see page 53).
An encryption method not supported by the Nintendo DS system has been set (see page 53).
ACCESS POINT LIST SCREEN
If you tap an access point
that has a next to it, the
WEP Key Input Screen will
be displayed. You should
then input the same WEP
Key that has been registered
on the access point.
Choose an access point and tap it! The search
results will be a list of nearby access points.
Choose one and tap it.
Note: If no access points are found, configure the settings using method C.
CONNECTION
SETTINGS SCREEN
Tap the SEARCH FOR AN
ACCESS POINT Panel.
SETUP
COMPLETE
CONNECTION
TEST SCREEN
Tap (BACK)
to exit
from the
configuration
operation.
If the connection test
fails, see page 50.
CONFIGURATION METHOD :
CONFIGURING THE SETTINGS MANUALLY OR CHANGING THE SETTINGS
NINTENDO WI-FI NINTENDO WI-FI
CONNECTION
CONNECTION
SETUP SCREEN
SETTINGS SCREEN
Tap the NINTENDO Tap an UNCONFIGURED
WI-FI CONNECTION
connection.
SETTINGS Panel. Note: You can also tap a
CONFIGURED connection
and change it.
CONNECTION SETTINGS SCREEN
Tap an item to edit! Edit the item!
Edit the items and carry out a connection test.
CONNECTION
SETTINGS SCREEN
Tap the MANUAL
SETUP Panel.
SETUP
COMPLETE
CONNECTION
SETTINGS SCREEN
Tap (BACK)
to exit
from the
configuration
operation.
Touch the SAVE SETTINGS box
to start the connection test.