Nintendo NTRGUBRP Instruction Booklet page 23

USING THE NINTENDO WI-FI USB
CONNECTOR (SOLD SEPERATELY)
Before carrying out the procedure explained below, you
will need to install the Nintendo Wi-Fi USB Connector
Registration Tool on your computer and configure it for
use. For details, refer to the Nintendo Wi-Fi USB Connector
Instruction Booklet.
Note: If your access point supports AOSS (by Buffalo
Inc.), you can configure the settings easily using the functions of the system in
question. For details, refer to the instruction booklet for your access point.
NINTENDO WI-FI NINTENDO WI-FI
CONNECTION CONNECTION
SETUP SCREEN SETTINGS SCREEN
Tap the NINTENDO Tap the CONNECT TO
WI-FI CONNECTION YOUR NINTENDO WI-FI
SETTINGS Panel. USB CONNECTOR Panel.
OPERATIONS CARRIED OUT
NINTENDO WI-FI
CONNECTOR
CONNECTION SCREEN
When you double-click the Nintendo Wi-Fi
Connection icon in the notification area on the
Windows taskbar, the Registration Tool Screen
will be displayed. From the list of Nintendo DS
Check that the Nintendo
system nicknames displayed on that screen,
Wi-Fi USB Connector has
click the ones you want to allow access to, then
been configured and
click GRANT PERMISSION TO CONNECT on the
then tap NEXT.
menu displayed.
Broadband Internet
connection
DSL or cable modem or
equivalent
ON THE COMPUTER
NOTIFICATION AREA
ON WINDOWS TASKBAR
Double-click here!
REGISTRATION TOOLSCREEN
Click on the names
you want to allow
access to!
Computer + Nintendo
Wi-Fi USB Connector
CONNECTION TEST SCREEN
Tap to begin
connection test!
If the connection test fails,
refer to page 50.
SETUP COMPLETE
When you have completed
the setup, tap (BACK)
to exit from the configura-
tion operation.