Dell E228WFP - 22" LCD Monitor User Manual page 24

A
Input select
B
OSD menu / select
C
Brightness/Contrast Hot Key
C,
D
Down (-) and Up (+)
Use the Input Select button to select between two different video signals that may be connected to your monitor.
Description of auto- sync detect: If both VGA and DVI cables are connected to one PC, this monitor will display an
image automatically just as long as a video signal is present in either VGA or DVI outputs. When connecting one
display to two PCs, if using screen savers, best to set both to the exact times. Whichever mouse is moved first will
activate that video input first.
NOTE: The floating 'Dell Self-test Feature Check' dialog appears on a black background if the monitor
cannot sense a video signal. Using the input select button, select the desired input to be tested either
Analog Input or Digital Input. Disconnect the video cable from the video card and the Dell Self
Feature Check dialogue box will appear if the display is operating correctly.
The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See
Using the OSD Menu.
Use this button for direct access to the "Brightness" and "Contrast" control menu.
Use these buttons to adjust (decrease/increase ranges) items in the OSD menu.
NOTE: You can activate automatic scroll feature by pressing and holding either + or - button.
or
or