Dell 1704FPV - UltraSharp - 17" LCD Monitor User Manual page 19

(optional)
Yes — enables audio
No — disables audio (default)
NOTE: When the Dell Soundbar is not properly connected to the monitor, the audio menu is not available.
Factory Reset:
Reset the OSD menu options to the factory preset values.
Exit — Select to exit out of Factory Reset menu without resetting any OSD options.
Position settings only — Change the settings for Image Position back to original factory settings.
Color settings only — Change the Red, Green, and Blue settings back to their original factory settings and set the default setting for Normal Preset.
All settings — Change all the user adjustable settings including color, position, brightness, contrast and OSD hold time to the factory defaults. The
language of the OSD does not change.
OSD Warning Messages
One of the following warning messages may appear on the screen indicating that the monitor is out of sync.
1.
Analog Input
Cannot Display This Video Mode
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See
Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1280 X 1024 @ 60Hz.
NOTE: The floating Dell Self-test Feature Check dialog appears on-screen if the monitor cannot sense a video signal.
2.Digital Input
or
Cannot Display This Video Mode
Specifications for the