Yamaha RX-V765BL Owner's Manual page 36

FM/AM tuning
y
• You can select the preset number at which the preset starts by
pressing fPRESET k / n or kCursor k / n on the remote
control while "READY" is displayed on the front panel display.
• To cancel registration, press kRETURN on the remote control.
Status
01:FM 87.50MHz
Preset number
During the automatic station preset, the upper area of
the screen changes as follows: SEARCH →
MEMORY each time a station is registered.
When registration is complete, "FINISH" appears
and the OPTION menu screen automatically
reappears. When you press rOPTION on the
remote control, the screen returns to the original state.
Note
• Only Radio Data System broadcasting station are stored
automatically by automatic preset tuning.
Registering stations by manual station
preset
You can manually register AM stations or FM stations
with weak signals.
1
Tune into a station referring to "Tuning into
the desired FM/AM station
(Frequency tuning mode)" (see page 31).
2
Press GMEMORY (or fMEMORY).
"Manual Preset" appears on the front panel display,
followed soon by the preset number to which the
station will be registered.
y
• By pressing down GMEMORY (or fMEMORY) for more
than 2 seconds, you can skip step 3. The station is registered to the
lowest empty preset number or a preset number one higher than the
last preset number.
3
Press HPRESET l / h (or fPRESET k / n)
to select the preset number to which the station
will be registered.
When you select a preset number to which no station
is registered, "Empty" appears on the display. When
you select a registered preset number, a registered
frequency is displayed on the right of the preset
number.
Frequency to be registered
01:Empty
Empty (or frequency that is currently
Flashing
registered to the preset number)
Preset
number
y
• You can select a preset number using the mNumeric keys.
32
En
Frequency
4
Press GMEMORY (or fMEMORY) again to
register.
When registration is complete, the screen returns to
the original state.
y
• To cancel registration, press kRETURN on the remote control
or leave the tuner without any operations for about 30 seconds.
Calling a preset station (Preset tuning)
You can call preset stations registered by automatic station
preset or manual station preset.
Press HPRESET l / h (or fPRESET k / n) to
select a preset number.
y
• Preset numbers to which no stations are registered will be skipped.
• If no stations are registered, "No Presets" or "No Presets in Memory"
appears on the display. See page 31 and register stations.
• You can directly select a preset number by pressing a mNumeric
keys while calling a preset station. "Empty" appears on the display if
you enter a preset number to which no station is registered. "Wrong
Num." appears if you enter an invalid number.
• When you press mNumeric keys during normal tuning, a preset
number is selected. Set tuning mode to preset tuning mode using
HPRESET l / h (or fPRESET k / n) prior to the operation.
Clearing the preset station
1
Rotate the RINPUT selector (or press
eTUNER) to switch the input source to
"TUNER."
2
Press rOPTION on the remote control.
The OPTION menu screen for setting options of
tuner input appears on the front panel display.
3
Display "Clear Preset" using the kCursor
k / n and press kENTER.
The following screen appears on the display.
01:FM 92.50MHz
Preset number of the registered station you want to clear.
y
• You can cancel the operation and return to the OPTION menu
screen by pressing kRETURN on the remote control.
4
Select the preset number of the registered
station you want to clear using the kCursor
k / n and press kENTER.
The preset station registered to the selected preset
number is cleared. To clear the registration of
multiple preset numbers, repeat the above steps.
To end the operation, press rOPTION.