Web Control - Pioneer Elite SC-61 Operating Instructions Manual

13
Symptoms Causes
Audio playback is undesir- The audio file currently being played
ably stopped or disturbed. back was not recorded in a format
playable on this receiver.
The LAN cable is currently discon-
nected.
There is heavy traffic on the network
with the Internet being accessed on
the same network.
When in the DMR mode, depending
on the external controller being used,
playback may be interrupted when a
volume operation is performed from
the controller.
There is a connection routed through
a wireless LAN on the same network.
Cannot access Windows In case of Windows Media Player
Media Player 11 or 11: You are currently logged onto
Windows Media Player 12. the domain through your PC with
Windows XP or Windows Vista
installed.
In case of Windows Media Player
12: You are currently logged onto
the domain through your PC with
Windows 7 installed.
Cannot listen to Internet The firewall settings for components
radio stations. on the network are currently in
operation.
You are currently disconnected from
the Internet.
The broadcasts from an Internet
radio station are stopped or inter-
rupted.
The Network functions The remote control is not currently
cannot be operated with set to the Network function mode.
the buttons on the remote
control.
Remedies
Check whether the audio file was recorded in a format sup-
ported by this receiver.
Check whether the folder has been damaged or corrupted.
Note that there are cases where even the audio files listed
as playable on this receiver cannot be played back or
displayed (page 57).
Connect the LAN cable properly (page 32).
Use 100BASE-TX to access the components on the net-
work.
In this case, adjust the volume from the receiver or remote
control.
There may be a shortage of bandwidth on the 2.4 GHz band
used by the wireless LAN. Make wired LAN connections not
routed through a wireless LAN.
Install away from any devices emitting electromagnetic
waves on the 2.4 GHz band (microwave ovens, game con-
soles, etc.). If this does not solve the problem, stop using
other devices that emit electromagnetic waves.
Instead of logging onto the domain, log onto the local
machine (page 54).
Check the firewall settings for components on the network.
Check the connection settings for components on the
network, and consult with your network service provider if
necessary (page 87).
There are cases where you cannot listen to some Internet
radio stations even when they are listed in the list of Inter-
net radio stations on this receiver (page 54).
Press NET to set the remote control to the Network func-
tion mode (page 54).

Web Control

Symptoms Causes
Web Control screen is not This receiver's IP address has not
displayed on browser. been entered into the browser cor-
rectly.
Receiver settings cannot be JavaScript is disabled on the internet
made from a browser. browser.
The browser is not compatible with
JavaScript.
98
FAQ
Remedies
Check the receiver's IP address and enter it correctly in the
browser (page 87).
Enable JavaScript.
Use an internet browser that is compatible with JavaScript.