Brother PED-BASIC Instruction Manual page 8

The Choose Setup Language dialog
9
box appears. Select the desired
language, and then click [OK].
After a short while, the application
a
installer automatically starts up.
If the installer does not automatically start
up:
1) Click the [Start] button.
2) Click [Run].
The Run dialog box appears.
3) Type in the full path to the installer, and then click [OK] to start up the installer.
For example: D:\Setup (where "D:" is the name of the CD-ROM drive)
When the InstallShield Wizard appears,
b
click [Next] to continue with the
installation.
Click [Next] to install the application
c
into the default folder.
To install the application into another folder:
1) Click [Browse]. Select the drive and folder (if
necessary, type in the name of the new
folder).
2) When the desired folder is selected, click
[OK].
3) The "Choose Destination Location" shows
the selected folder. Click [Next] to install the
application into that folder.
N Click [Back] to return to the previous step.
N Click [Cancel] to exit.
When the installation is completed,
d
the dialog box shown at the right
appears.
With Windows 98 and ME, the computer
must be restarted. Be sure to click
[Restart] to complete the setup.
With other operating systems, it is not
necessary to restart the computer. Click
[Finish] to complete the setup.
This completes the entire setup operation.
4