Acer TravelMate 8172 Service Manual page 42

Parameter
Quiet Boot
Power on display
Network Boot
F12 Boot Menu
D2D Recovery
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Chapter 2
download service manual and resetter printer at http://printer1.blogspot.com
Description
Determines if Customer Logo will be displayed or
not; shows Summary Screen is disabled or
enabled.
Enabled: Customer Logo is displayed, and
Summary Screen is disabled.
Disabled: Customer Logo is not displayed, and
Summary Screen is enabled.
Auto: During power process, the system will
detect if any display device is connected on
external video port. If any external display device
is connected, the power on display will be in CRT
(or projector) only mode. Otherwise it will be in
LCD only mode.
Both: Simultaneously enable both the integrated
LCD screen and the system's external video port
(for an external CRT or projector).
Allows user to enable/disable the Network boot
function.
Allow user to enable/disable the F12 boot meny
function.
Enables, disables D2D Recovery function. The
function allows the user to create a hidden
partition on hard disc drive to store operation
system and restore the system to factory
defaults.
Format/Option
Enabled
Option: or Disabled
Auto
Option: or Both
Enabled
Option: or Disabled
Enabled
Option: or Disabled
Enabled
Option: or Disabled
36