Table of Contents
Advertisement
Pointing Device
The Notebook PC's integrated touchpad pointing
device is fully compatible with all two/three-but-
ton and scrolling knob PS/2 mice. The touchpad is
pressure sensitive and contains no moving parts;
therefore, mechanical failures can be avoided. A
device driver is still required for working with some
application software.
IMPORTANT! Do not use any objects in
place of your finger to operate the touch-
pad or else damage may occur to the
touchpad's surface.
Using the Touchpad
Light pressure with the tip of your finger is all that is
required to operate the touchpad. Because the touch-
pad is electrostatic sensitive, objects cannot be used in
place of your fingers. The touchpad's primary function
is to move the cursor around or select items displayed
on the screen with the use of your fingertip instead of
a standard desktop mouse. The following illustrations
demonstrate proper use of the touchpad.
Moving The Cursor
Place your finger in the center of the touchpad and
slide in a direction to move the cursor.
Pad-Lock Indicator (between touchpad buttons)
This indicator will light when the built-in touchpad is UNLOCKED (enabled). When the built-in
touchpad is LOCKED (disabled), this indicator will not light. Locking the touchpad will prevent
you from accidentally moving the cursor while typing and is best used with an external pointing
device such as a mouse.
Using the Notebook PC
Slide finger
forward
Slide finger
left
Slide finger
backward
4
Cursor
Movement
Right Click
Pad-Lock
Indicator
Left Click
Slide finger
right
41
Advertisement
Table of Contents
