Table of Contents
Advertisement
The battery pack is nearly used up.
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
No memory card is inserted (p. 25).
When the indicator flashes, there are not
enough free spaces for recording images.
Delete unnecessary images (p. 40), or format
the memory card after storing the images on
other media (p. 51).
The image data base file may be damaged.
Check the data base file by selecting
[Setup] [
Media Settings] [Repair
Img. DB F.] the recording medium (models
with internal memory).
The memory card is damaged.
Format the memory card with your camcorder
(p. 51).
Incompatible memory card is inserted (p. 26).
The memory card is write-protected.
Access to the memory card was restricted on
another device.
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
The recording medium is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
When set to the following, you cannot shoot
photos during movie recording.
[
REC Mode ]: [ Highest Quality
[
Frame Rate ]: [60p] (models with the
NTSC color system) or [50p] (models with
the PAL color system)
]
GB
Advertisement
Table of Contents
