Charging The Battery Pack Abroad - Sony Handycam HDR-PJ420VE Instruction & Operation Manual

To remove the battery pack
Close the LCD screen. Slide the BATT
(battery) release lever () and remove the
battery pack ().
To use your camcorder continuously for a long time
Connect the AC adaptor and the power cord (mains lead) to your camcorder and the wall outlet
(wall socket).
For details on how to connect the AC adaptor, refer to "Charging the battery pack"
By using the AC adaptor, you can use your camcorder without worrying about the battery
running out of charge.
Notes on the AC Adaptor
Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This

may cause a malfunction.
Disconnect the AC Adaptor from the camcorder while holding both the camcorder and the DC plug.


Recording time, Playing time (p. 56)

Remaining battery indicator (p. 29)


Charging the battery pack abroad

You can charge the battery pack in any countries/regions using the AC Adaptor supplied with
your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range. Do not use an electronic
voltage transformer.
GB

.
(p. 20)