Sony SRS-BTM8 Operating Instructions

Wireless Speaker System
Operating Instructions
Manual de instrucciones
4-440-489-11(1)
©2013 Sony Corporation Printed in China
SRS-BTM8
Others
English Wireless Speaker System
 If you have any questions or problems concerning this system
that are not covered in this manual, please consult your
Before operating the system, please read this guide thoroughly
nearest Sony dealer.
and retain it for future reference.
Owner's Record
What is Bluetooth wireless
The model number and the serial number are located on the
bottom.
Record the serial number in the space provided below. Refer to
technology?
them whenever you call upon your Sony dealer regarding this
product.
Bluetooth wireless technology is a short-range wireless
Model No. SRS-BTM8 technology that enables wireless data communication between
digital devices, such as a computer and digital camera. Bluetooth
Serial No. ________________________________
wireless technology operates within a range of about 10 m (30
ft).
WARNING
Connecting two devices as necessary is common, but some
devices can be connected to multiple devices at the same time.
To reduce the risk of fire or electric shock, do not expose this You do not need to use a cable for connection, nor is it necessary
for the devices to face one another, such is the case with infrared
apparatus to rain or moisture.
technology. For example, you can use such a device in a bag or
To reduce the risk of fire or electrical shock, do not open the pocket.
cabinet. Refer servicing to qualified personnel only. Bluetooth standard is an international standard supported by
thousands of companies all over the world, and employed by
To reduce the risk of fire, do not cover the ventilation opening of
various companies worldwide.
the apparatus with newspapers, tablecloths, curtains, etc. Do not
Communication System and Compatible
place the naked flame sources such as lighted candles on the
apparatus.
Bluetooth Profiles of the system
To reduce the risk of fire or electric shock, do not expose this
Profile is standardisation of the function for each Bluetooth
apparatus to dripping or splashing, and do not place objects
device specification. The system supports the following
filled with liquids, such as vases, on the apparatus.
Bluetooth version and profiles:
Communication System:
As the main plug of the AC adaptor is used to disconnect the AC
Bluetooth Specification version 3.0
adaptor from the mains, connect the system to an easily
Compatible Bluetooth Profiles:
accessible AC outlet. Should you notice an abnormality in the
– A2DP (Advanced Audio Distribution Profile): Transmitting or
system, disconnect the main plug from AC outlet immediately.
receiving audio content of high-quality.
The system is not disconnected from the AC power source – AVRCP (Audio Video Remote Control Profile): Controlling A/V
(mains) as long as it is connected to the AC outlet, even if the equipment; pausing, stopping, or starting playback, etc.
–
system itself has been turned off. HSP (Headset Profile): Talking on the phone/Operating the
phone.
On Copyrights and Licenses
– HFP (Hands-free Profile): Talking on the phone/Operating the
The Bluetooth® word mark and logos are owned by the Bluetooth phone by hands-free.
SIG, Inc. and any use of such marks by Sony Corporation is under
Maximum communication range
license.
The N Mark is a trademark or registered trademark of NFC Forum,
Use Bluetooth devices within 10 m (about 30 ft) (line of sight) of
Inc. in the United States and in other countries.
the system.
Android is a trademark of Google Inc.
Maximum communication range may shorten under the
Other trademarks and trade names are those of their respective
following conditions.
owners.
–
There is an obstacle such as a person, metal, or wall between
the system and Bluetooth device.
CAUTION
– A wireless LAN device is in use near the system.
You are cautioned that any changes or modifications not
– A microwave oven is in use near the system.
expressly approved in this manual could void your authority to
– A device that generates electromagnetic radiation is in use
operate this equipment.
near the system.
NOTE
Interference from other devices
This equipment has been tested and found to comply with the
Because Bluetooth devices and wireless LAN (IEEE802.11b/g) use
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable the same frequency, microwave interference may occur and
protection against harmful interference in a residential resulting in communication speed deterioration, noise, or invalid
connection if the system is used near a wireless LAN device. In
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in such a case, perform the following.
– Use the system at least 10 m (about 30 ft) away from the
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no wireless LAN device.
guarantee that interference will not occur in a particular – If the system is used within 10 m (about 30 ft) of a wireless
LAN device, turn off the wireless LAN device.
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
Interference to other devices
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following Microwaves emitting from a Bluetooth device may affect the
measures:
operation of electronic medical devices. Turn off the system and
– Reorient or relocate the receiving antenna. other Bluetooth devices in the following locations, as it may
– Increase the separation between the equipment and receiver.
cause an accident.
– Connect the equipment into an outlet on a circuit different – where inflammable gas is present, in a hospital, train,
from that to which the receiver is connected. airplane, or a gas station
– Consult the dealer or an experienced radio/TV technician for
– near automatic doors or a fire alarm
help.
Notes
This equipment must not be co-located or operated in
 To be able to use the Bluetooth function, the Bluetooth device
conjunction with any other antenna or transmitter.
to be connected requires the same profile as the system's.
Note also that even if the same profile exists, devices may vary
The following FCC/IC statement applies only to the version of
in function depending on their specifications.
this model manufactured for sale in the U.S.A. and Canada. Other
 Due to the characteristic of Bluetooth wireless technology, the
versions may not comply with FCC/IC technical regulations.
sound played on the system is slightly delayed from the sound
This equipment complies with FCC/IC radiation exposure limits
played on the Bluetooth device during talking on the
set forth for an uncontrolled environment and meets the FCC
telephone or listening to the music.
radio frequency (RF) Exposure Guidelines in Supplement C to
 This system supports security capabilities that comply with
OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.
the Bluetooth standard to provide a secure connection when
This equipment has very low levels of RF energy that it deemed
the Bluetooth wireless technology is used, but security may
to comply without maximum permissive exposure evaluation
not be enough depending on the setting. Be careful when
(MPE). But it is desirable that it should be installed and operated
communicating using Bluetooth wireless technology.
keeping the radiator at least 20 cm or more away from person's
 We do not take any responsibility for the leakage of
body (excluding extremities: hands, wrists, feet and ankles).
information during Bluetooth communication.
 A device featuring the Bluetooth function is required to
Important Safety Instructions
conform to the Bluetooth standard specified by Bluetooth SIG,
1) Read these instructions.
and be authenticated. Even if the connected device conforms
2) Keep these instructions.
to the above mentioned Bluetooth standard, some devices
3) Heed all warnings.
may not be connected or work correctly, depending on the
4) Follow all instructions.
features or specifications of the device.
5) Do not use this apparatus near water.
 Noise or sound skips may occur depending on the Bluetooth
6) Clean only with dry cloth.
device connected with the system, the communication
7) Do not block any ventilation openings.
environment or the usage environment.
Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
Precautions
Notes when using with a mobile phone
 For details on operation of your mobile phone when receiving
a telephone call while transmitting the sound using the
Bluetooth connection, refer to the operating instructions
supplied with the mobile phone.
On safety
The nameplate indicating Sony trademark, model number and
electrical rating is located on the bottom exterior of this system
and on the surface of the AC adaptor.
Notes on the AC adaptor
 When connecting or disconnecting the AC adaptor, turn off
the system beforehand. Otherwise, it may cause malfunction.
 Use only the supplied AC adaptor. To avoid damaging the
system, do not use any other AC adaptor.
Polarity of the plug
 Plug the AC adaptor into a nearby wall outlet (mains). In the
case of a problem, unplug it from the wall outlet (mains)
immediately.
 Do not install the AC adaptor in a confined space, such as a
bookcase or built-in cabinet.
 To reduce the risk of fire or electric shock, do not expose the
AC adaptor to dripping or splashing, and do not place objects
filled with liquids, such as vases, on the AC adaptor.
On placement
 Do not set the speaker in an inclined position.
 Do not leave the system in a location near heat sources, or in a
place subject to direct sunlight, excessive dust, moisture, rain
or mechanical shock.
 Do not expose the battery to excessive heat such as direct
sunlight, fire or the like.
On operation
 Do not insert any small objects, etc., into the jacks. The system
may short out or malfunction.
On cleaning
 Do not use alcohol, benzine, or thinner to clean the cabinet.
BLUETOOTH Top of the system
/ button
PAIRING button (call) button
OPR/BATT  (play/ N-mark VOLUME
indicator (green) pause) button −/+ button
Handle
(Bluetooth) indicator (blue)
Microphone
Battery compartment
(bottom of the system)
Rear of the system
DC IN 6V jack AUDIO IN jack
Function of Parts
(Bluetooth) indicator (blue)
/ button
Lights up or flashes depending on the communication status.
Turns the system on/off.
For details, see the following section, "Indications of the
OPR/BATT indicator (green)
Bluetooth function. "
Lights up when the system is turned on. Dims during battery
Microphone
operation if battery power is low.
Use during call.
BLUETOOTH PAIRING button
Press to pair with a Bluetooth device. AUDIO IN jack
Connects to the headphone jack of a portable audio device,
 (play/pause) button
computer, etc., using a connecting cord (not supplied).
Operates a connected Bluetooth device. You cannot operate a
DC IN 6V jack
device connected to the AUDIO IN jack.
Connects the supplied AC adaptor.
N-mark
Battery compartment
Touch to make Bluetooth connection with an NFC compatible
Insert four alkaline LR6 (size AA) batteries (not supplied).
smartphone.
(call) button
Indications of the Bluetooth function
Press to call or operate during a call.
VOLUME −/+ button
Status (Bluetooth) indicator (blue)
Adjusts the volume. A beep sounds from the speakers when
Pairing with a device Flashes quickly
the volume is set to minimum or maximum.
Searching for a device Flashes
Handle
Hold to carry the system. Connected to a device Lights up
Turning the System on/off
1
Connect the supplied AC adaptor.
2 Press the / button.
The OPR/BATT indicator (green) lights up.
Indicator lights up.
To use with LR6 (size AA) batteries (not supplied)
1
Open the cover located on the bottom of the system and install four alkaline LR6 (size AA) batteries (not supplied), then close the
cover.

2 Press the / button.
Note
 If the AC adaptor is used with the system, the power source switches to the wall outlet (mains) automatically, even if batteries are installed.
Installed batteries cannot be the power source when the AC adaptor is connected to the system. Make sure the plug of the AC adaptor is
disconnected from the system when using the system with batteries.
How to Make Wireless Connection with Bluetooth
Devices
You can enjoy music and hands-free calling with the system wirelessly by using your device's Bluetooth function.
Choose one of the following three connection methods, best suited for the Bluetooth device. For details on how to operate your device,
refer to the operating instructions supplied with the device.
Pairing with a Bluetooth device: see
Pattern A
Bluetooth devices need to be "paired" with each other beforehand.
Connecting with a paired device: see Pattern B
To listen to music with a Bluetooth device that has been paired, see this pattern.
One touch connection with a smartphone (NFC): see
Pattern C
Using an NFC compatible smartphone, you can establish a Bluetooth connection by just touching the system with it.
Check the following before operating the system.
 Both the system and the device are placed within 1 m (3 ft) of each other.
 The system is connected to a power source, or batteries are installed in the system.
 The operating instructions supplied with the device are kept at hand.
Pattern A Pairing and connecting with a Bluetooth device
1 Turn on the system.
2
Set the Bluetooth function of the Bluetooth device to on.
For details, refer to the operating instructions supplied with the device.
3 Press and hold the BLUETOOTH PAIRING button on the system until beeps are heard and the
(Bluetooth) indicator (blue) begins to flash quickly.
Tip
 When the system is turned on first, the (Bluetooth) indicator (blue) starts flashing quickly.
Indicator flashes quickly.
4 Perform the pairing procedure on the Bluetooth device to detect the system.
If "SRS-BTM8" does not appear on the device's display, repeat from step 2.
Note
 Some devices cannot display a list of detected devices.
5
Select "SRS-BTM8" shown in the display of the Bluetooth device.
6 If Passcode* input is required on the display of the Bluetooth device, input "0000. "
The Bluetooth connection is established and the (Bluetooth) indicator (blue) on the system stays on.
* Passcode may be called "Passkey, " "PIN code, " "PIN number, " or "Password. "
Tip
 To pair with other Bluetooth devices, repeat steps 2 to 6 for each device.
Notes
 Pairing mode of the system is canceled after about 5 minutes, and the (Bluetooth) indicator (blue) flashes slowly. If the pairing mode is
canceled while performing this procedure, start over from step 3.
 Passcode of the system is fixed as "0000. " The system cannot be paired with a Bluetooth device whose Passcode is not "0000. "
 Once Bluetooth devices are paired, there is no need to pair those devices again. However, in the following cases, you will need to perform the
pairing procedure again.
– Pairing information is deleted after repair, etc.
–
The system is paired with 5 or more devices.
The system can be paired with up to 4 Bluetooth devices. If a new device is paired after 4 devices have been paired, the device whose latest
connection time is the oldest among the 4 paired devices is replaced by the new one.
 More than one device can be paired with the system, but sound will be heard from just one of those devices.
To delete all pairing information from the system
Hold the / button for more than 15 seconds while the system is turned off. The system is reset to its default and all pairing information is
deleted.
Connecting with a paired Bluetooth device
Pattern B
1 Turn on the system.
The (Bluetooth) indicator (blue) flashes.
2
Set the Bluetooth function of the Bluetooth device to on.
Tip
 When turned on, the system tries to establish Bluetooth connection with the Bluetooth device connected to the system last time. When
Bluetooth connection is established, the (Bluetooth) indicator (blue) on the system stays on.
3 Select "SRS-BTM8" shown in the display of the Bluetooth device.
If necessary, select a Bluetooth profile that the system supports from the following: A2DP, HSP or HFP. For details on each profile,
see "Listening to Music" or "Using Hands-free Calling While Listening to Music. "
Note
 This step may not be necessary for some devices.
The Bluetooth connection is established and the (Bluetooth) indicator (blue) on the system stays on.
Connecting with a smartphone by One touch (NFC)
Pattern C
By just touching the system with an NFC compatible smartphone, the system is turned on automatically and then paired and
connected with the smartphone.
1 Download and install the app "NFC Easy Connect" on the smartphone.
"NFC Easy Connect" is an original app by Sony for Android phones, and is available at Google Play Store.
Search for "NFC Easy Connect" or scan the following two-dimensional code to download and install the free app. Communication
fees are required to download the app.
The App may not be available in some countries and/or regions.
Tip
 For some smartphones, One touch connection may be available without downloading the app "NFC Easy Connect. " In that case, the
operation and specifications may be different from the description here. For details, refer to the operating instructions supplied with the
smartphone.
By the two-dimensional code:
Use a two-dimensional code reader app.
Compatible smartphones
 Smartphones with the NFC function built-in
(OS: Android 2.3.3 or later, excluding Android 3.x)
Customers in the U.S.A.
Access the following Web site for details:
http://esupport.sony.com/US
About NFC
NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as
mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant
symbol or designated location on NFC compatible devices.
2
Start the app "NFC Easy Connect" on the smartphone.
Make sure that the application screen is displayed.
3 Touch the system with the smartphone.
Keep touching the smartphone on the N marked part of the system until the smartphone vibrates.
Smartphone vibrates
(system recognized)
Indicator lights up.
Follow the on-screen instructions to establish the connection.
When the Bluetooth connection is established, the (Bluetooth) indicator (blue) stays on.
Tips
 If it is difficult to establish the connection, try the following.
– Activate the app "NFC Easy Connect" and move the smartphone slightly on the N marked part of the system.
– If the smartphone is in a case, remove it.
 Touch the system with the smartphone again to disconnect.
 If you have multiple NFC compatible devices, just touch the smartphone to a different device to switch the connection to that device. For
example, when your smartphone is connected with NFC compatible headphones, just touch the smartphone to the system to change the
Bluetooth connection to the system (One touch connection switching).
Listening to Music
You can enjoy listening to music and basic remote control operation of a Bluetooth device via Bluetooth connection. The Bluetooth
device is required to support the following Bluetooth profiles.
 A2DP (Advanced Audio Distribution Profile): enables you to enjoy high-quality audio content wirelessly.
 AVRCP (Audio Video Remote Control Profile): enables you to enjoy basic remote control operation (play, stop, etc.) of a Bluetooth
device.
Operations may vary depending on the Bluetooth device. Refer also to the operating instructions supplied with your Bluetooth device.
1 Make the Bluetooth connection between the system and the device.
For details on the Bluetooth connection procedure, see "How to Make Wireless Connection with Bluetooth Devices. " When the
Bluetooth connection is established, the (Bluetooth) indicator (blue) on the system stays on.
2
Start playback on the Bluetooth device, then adjust the volume.
Set the volume of the Bluetooth device to a moderate level, and press the VOLUME –/+ buttons on the system.
Pressing  (play/pause) button on the system, you can operate a Bluetooth device that supports AVRCP. Available functions
may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the Bluetooth device.
After use
Do any of the following.
 Set the Bluetooth function of the Bluetooth device to off. For details, refer to the operating instructions supplied with the device.
 Turn off the Bluetooth device.
 Turn off the system.
 Touch the system with the smartphone again to disconnect (NFC compatible smartphones only).
Tip
 When connected with a Bluetooth device via A2DP/AVRCP and playback has been stopped for about 20 minutes, the system turns off
automatically.
Using Hands-free Calling While Listening to Music
You can enjoy hands-free calling via Bluetooth connection with a Bluetooth mobile phone that has a music function and supports the
Bluetooth profile A2DP (Advanced Audio Distribution Profile), and HFP (Hands-free Profile) or HSP (Headset Profile).
If your Bluetooth mobile phone supports both HFP and HSP, set to HFP.
Operations may vary depending on the Bluetooth mobile phone. Refer also to the operating instructions supplied with your mobile
phone.
1 Make the Bluetooth connection between the system and the mobile phone.
For details on the Bluetooth connection procedure, see "How to Make Wireless Connection with Bluetooth Devices. " When the
Bluetooth connection is established, the (Bluetooth) indicator (blue) on the system stays on.
2
Start playback on the Bluetooth mobile phone, then adjust the volume.
Set the volume of the Bluetooth mobile phone to a moderate level, and press the VOLUME –/+ buttons on the system.
By pressing the  (play/pause) button on the system, you can operate a Bluetooth mobile phone that supports AVRCP.
Available functions may vary depending on the Bluetooth mobile phone. Refer to the operating instructions supplied with the
Bluetooth mobile phone.
To call
Operate the Bluetooth mobile phone. Check that a dialing tone is heard on the system and talk using the microphone. If no dialing
tone is heard, press the (call) button on the system for about 2 seconds to change the call device to the system.
To receive a call
When an incoming call arrives, the playback pauses and a ring tone is heard from the system. Press the (call) button on the system
and talk using the microphone.
Tips
 If no ring tone is heard from the system when incoming call arrives, stop playback and press the (call) button to talk.
 You can use the hands-free calling when playback is completed.
 During a call, press the VOLUME –/+ buttons on the system to adjust the volume. The volume of a call and that of a playback are set separately.
Note
 When using a mobile phone, keep it 50 cm or more away from the system. If they are too close together, noise may be heard.
To end a call
Press the (call) button. If you were listening to music when the call arrived, it will be resumed when the call has finished.
After use
Do any of the following.
 Set the Bluetooth function of the Bluetooth device to off. For details, refer to the operating instructions supplied with the device.
 Turn off the Bluetooth device.
 Turn off the system.
 Touch the system with the smartphone again to disconnect (NFC compatible smartphones only).
Unit button functions during a call
Available functions may vary depending on the Bluetooth mobile phone, or the profiles supported by the Bluetooth mobile phone.
Refer to the operating instructions supplied with the Bluetooth mobile phone.
Status (call) button
Standby
 Press once to start voice dial (voice dial compatible mobile phones only).
 Press for about 2 seconds to redial the phone number that is dialed last time.
Outgoing call
 Press once to cancel outgoing call.
 Press for about 2 seconds to change call device between the system and mobile phone.
Incoming call
 Press once to answer call.
 Press for about 2 seconds to reject call.
During call  Press once to finish call.
 Press for about 2 seconds to change call device between the system and mobile phone.
Using Hands-free Calling with Another Bluetooth Mobile Phone While Listening to
Music
This system supports Multipoint technology. You can enjoy hands-free calling with another Bluetooth mobile phone while listening to
music with a Bluetooth music player.
 One touch connection (NFC) cannot be used in this procedure.
 Operations may vary depending on the Bluetooth device. This type of Bluetooth connection may not be established depending on
the combination of the Bluetooth devices. Refer also to the operating instructions supplied with your Bluetooth devices.
1 Make the Bluetooth connections between the system and a Bluetooth music player via A2DP, and
between the system and a Bluetooth mobile phone via HFP or HSP.
For details on the Bluetooth connection procedure, see "How to Make Wireless Connection with Bluetooth Devices. " When the
Bluetooth connection is established, the (Bluetooth) indicator (blue) on the system stays on.
Tips
 To use only the calling function of a Bluetooth mobile phone that also has a music function, establish Bluetooth connection between the
system and the mobile phone via HFP or HSP, not via A2DP.
 Depending on the Bluetooth mobile phone, while the Bluetooth connection is established via HFP or HSP, the other Bluetooth connection
via A2DP may also be occupied by the same Bluetooth mobile phone. A Bluetooth music player cannot be connected with this system in
this case.
Note
 To make the same connection with the same devices after turning the system off, follow this procedure again.
Listening to Music by Wired Connection with a Portable
Audio Device, etc.
1 Connect the device to the system.
Connecting cord (not supplied)
(Stereo mini jack)
2 Turn on the system.
3 Start playback on the connected device, then adjust the volume.
Set the volume of the connected device to a moderate level, and press the VOLUME –/+ buttons on the system.
Notes
 When connecting cord (not supplied) is used with this system, the source device switches to the one connected by the cord automatically,
even if you are listening to music via the Bluetooth connection.
 You cannot listen to music via the Bluetooth connection while a connecting cord (not supplied) is used with this system. After use, disconnect
it.
Tips
 You can use hands-free calling while a connecting cord (not supplied) is used with this system.
 When connected with a source device via a connecting cord (not supplied), not via a Bluetooth connection, and playback has been stopped for
about 20 minutes, the system turns off automatically.
Troubleshooting
No sound / Sound from only one speaker /
Low sound level
Check that both this system and If you are connecting a personal
the connected device are turned computer to the system, make
on. sure the audio output setting of
the computer is set for a Bluetooth
device.
Turn up the volume of the system Pair this system and the Bluetooth
and the connected device. device again.
Check that the connected device If the connected device is monaural,
is being played back. sound will only be output from the
left speaker.
Check that both plugs of the
connecting cord (not supplied)
are firmly inserted into the system
and the connected device.
Distorted sound /
Humming or noise in the system output
Turn down the volume of the Keep the system away from a TV.
connected device.
Switch the Bluetooth connection to
If the connected device has an
equalizer function, set it to off. A2DP by operating the Bluetooth
device when HFP or HSP is set.
Keep the system away from a If the OPR/BATT indicator (green) is
microwave oven, wireless LAN, dim, replace all the batteries with
etc. new ones.
Bring this system and the If you connect a device with a built-
Bluetooth device closer together. in radio or tuner to this system,
Remove any obstacle between broadcasts may not be received, or
this system and the Bluetooth sensitivity may be reduced. Locate
device. the system farther away from the
device and check that you can listen
to the broadcasts satisfactorily.
Pairing is not possible
Bring this system and the
If the (Bluetooth) indicator (blue)
Bluetooth device to within
is not flashing quickly, press and
1 m (3 ft) of each other.
hold the BLUETOOTH PAIRING
button on the system until beeps
are heard.
No voice / Low voice from recipient
Check that both this system and Select HFP or HSP Bluetooth
the connected device are turned connection by operating the
on. Bluetooth device.
Check that output of the Turn up the volume of the system
Bluetooth mobile phone is set for and the connected device.
the system.
One touch connection (NFC) is
not possible
Keep the smartphone close to the If the smartphone is in a case,
system until the smartphone remove it.
vibrates. If you fail, move the
smartphone slightly on the N
marked part of the system.
Check that the NFC function of NFC receiving sensitivity depends
the smartphone is set to on. on the device. If you fail to connect
with a smartphone by One touch
several times, connect to the
system by on-screen operation.
Check that the "NFC Easy
Connect" app is displayed on the
smartphone.
Specifications
Speaker section Microphone
Speaker system 50 mm (2 in) Type: Electret condenser
Enclosure type Bass reflex Direction characteristic:
Omni directional
Amplifier section
Effective frequency range:
Reference output power 200 Hz – 3,600 Hz
2 W + 2 W (10 % T.H.D., 1 kHz, 6 Ω)
Operating temperature:
Input Stereo mini jack × 1 0 °C to 45 °C (32 °F to 113 °F)
Bluetooth
General
Communication System
Power DC 6 V (when using the supplied AC adaptor
Bluetooth Specification version 3.0
connected to AC 120 V, 60 Hz power supply)
Output Bluetooth Specification Power Class 2 or 4 alkaline LR6 (size AA) batteries
Maximum communication range
Rated power consumption
Line of sight approx. 10 m (30 ft)* 1 6 W (when using the supplied AC adaptor)
Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Approx. 0.2 W (in standby mode when using
the supplied AC adaptor)
Modulation method
FHSS Battery life (when using the Bluetooth connection)
Sony alkaline battery LR6 (size AA):
Compatible Bluetooth Profiles*
2
approx. 20 hours* 5
A2DP (Advanced Audio Distribution Profile)
Dimensions Approximately 245 mm × 185 mm × 88 mm
AVRCP (Audio Video Remote Control Profile)
HSP (Headset Profile) (9 3 / in × 7 3 / in × 3 1 / in) (w/h/d)
4 8 2
HFP (Hands-free Profile) Mass Approximately 1,060 g (2 lb 5 / 3 oz)
8
Supported Codec* 3 including batteries
SBC* 4 Supplied accessories
Transmission range (A2DP) AC adaptor (1)
Operating Instructions (this document) (1)
20 Hz - 20,000 Hz (Sampling frequency
44.1 kHz) * Time may vary, depending on the temperature or conditions
5
of use.
* 1 The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
Design and specifications are subject to change without notice.
microwave oven, static electricity, reception sensitivity,
antenna's performance, operating system, software
application, etc.
* 2 Bluetooth standard profiles indicate the purpose of Bluetooth
communication between devices.
* 3 Codec: Audio signal compression and conversion format
* 4 Subband Codec