Canon PowerShot A60 Software Starter Manual page 126

120
Troubleshooting
Windows XP and Windows 2000
<Check to see if the camera is being recognized as an "other"
device and delete the driver if it is.>
1. Windows XP: Click the [Start] menu, followed by [Control Panel],
[Performance and Maintenance] and [System].
Windows 2000: Click the [Start] menu and select [Settings] and
[Control Panel]. Double-click the [System] icon.
2. Click the [Hardware] tab, followed by [Device Manager].
3. Click the
category. Your camera model name or [Canon Camera] will display in
these categories if it is being recognized as an "other" device.
4. Select your camera model name or [Canon Camera], right-click and
select [Delete].
5. Click [OK] in the confirmation dialog.
Delete all instances of your camera model name or [Canon Camera] if it
appears in one or more places in the [Other devices] or [Imaging devices]
categories.
6. Close the [System Properties] window.
Users of Windows XP Professional and Windows 2000 must
first log in as an Administrator (computer system
administrator) to delete a driver.
symbol beside the [Other devices] and/or [Imaging devices]
There are other potential reasons for the problem if the
"Other devices" or "Imaging devices" categories do not
appear or your camera model name or [Canon Camera] does
not appear. Proceed to Step 6, temporarily quit the
procedures and investigate the other potential causes.
Step 7 and above are not required for Windows XP with
cameras other than the PowerShot G3, PowerShot S45 and
PowerShot S230 DIGITAL ELPH/DIGITAL IXUS v
3
.