Sony Handycam DCR-SX22E Instruction & Operation Manual page 33

Output
VIDEO
(Yellow)
Signal flow
 Press PROJECTOR.
To change the aspect ratio while using
the projector
 Select (MENU)  [Show others]
 [PROJECTOR] (under
category).
 Select [SCREEN FORMAT]  [16:9
WIDE] or [4:3].
Notes
Be careful of the following operations or

situations while using the projector.
Make sure not to project images towards the

eyes.
Make sure not to touch the projector lens.

The LCD screen and the projector lens

become hot while in use.
Using the projector shortens battery life.

If you connect the camcorder to a TV and use

the projector function, sound will be output
from the TV; however, no image will be output.
PROJECTOR
IN jack
[OTHERS]
GB

The following operations are unavailable while

you are using the projector.
Displaying recording screen

Operation of the camcorder with the LCD

screen closed
Several other functions

Place the camcorder about 0.5 m to 3 m (1.6

feet to 9.8 feet) away from the surface that the
images are projected onto.
Connect your camcorder to a wall outlet (wall

socket) using the supplied AC Adaptor for this
operation.
Sound of other devices cannot be input to the

camcorder.
Operation buttons are not displayed on images

projected when [PROJECTOR INPUT] is set.
If the camcorder is not connected to another
device, a blank blue screen will be projected.
Perform the following operations when you
want to project images on the camcorder.
Firstly, press PROJECTOR to stop projecting.

(MENU)  [Show others]
Select
 [PROJECTOR] (under
category)  [SOURCE]  [MEMORY
CARD] 
, and then press
PROJECTOR again.
Turn the power of the camcorder off, then on

again, and then press PROJECTOR.
[OTHERS]