Brother LK3-B434E Parts Manual

LK3 B434E
LK3 B434EX
LK3 B434EX/SF
Electronic Lockstitch Pattern Tacker
Electronic Lockstitch Pattern Tacker
with Stepping Foot

Specifications

Model
Application
Stitch formation
Max. sewing speed
Max. pattern size
Feed mechanism
Stitch length
Max. stitch number
Work clamp lifter
Work clamp height
Hook
Wiper device
Thread trimmer device
Stepping foot lift amount
Stepping foot stroke
Safety equipment
Data storage method
No. of stored data
Motor
Weights
Power supply
*1 Because of the R
sewing pitch is set to 3 mm or less.
LK3 B434E
Thin, medium, heavy,
extra heavy materials
R intermittent feed mechanism (pulse motor driven mechanism)
5,000 stitches (including 4,000 stitches which can be added)
Solenoid type or pneumatic type
(Max. 17 mm for inner clamping device)
PROM (Any sewing pattern can be added using BAS PC/300)
Up to 50 patterns can be added. Total number of stitches of stored data which can be
Machine head: 49kg Control box: 9 19kg (depending
feed, sewing at maximum speed may not be possible for some sewing data, even if the
LK3 B434EX
Medium, extra heavy
materials
Single needle lock stitch
2,000 rpm (Pitch 3 mm *1)
Max. 100 60 mm
0.1 10.0 mm
For solenoid : 17 mm max.
For pneumatic : 20 mm max.
Shuttle hook ( 1.8 shuttle hook, optional)
Standard equipment
Standard equipment
18 mm (Stepping foot specifications only)
0, 3 8 mm (Stepping foot specifications only)
Built in stopping mechanism
added is within 4,000.
Three phase 400W induction motor
on destination)
Single phase 220 230V
Three phase 220, 380, 400, 415V
Max. electric power consumption; 600VA
2000.7
LK3 B434EX / SF
Extra heavy materials
Pneumatic type
20 mm max.
Machine head: 50kg
Control box: 9 19kg
(depending on destination)
LK3 B434E 1/17