Samsung Galaxy Note 10.1 3G & WiFi User Manual page 133

›
Add a Wi-Fi network manually
1
Open the application list and select
Add Wi-Fi network.
2
Enter an SSID for the network and select a security type.
3
Set the security settings depending on the selected
security type.
4
Save.
Select
›
Connect to a Wi-Fi network using a Wi-Fi
Protected Setup (WPS)
Using WPS, you can connect to a secured network.
Connect with a WPS button
1
Open the application list and select
2
Select a network indicated as WPS available under
networks.
3
Enter a password for the network
select
4
Press a WPS button on the access point within 2 minutes.
Connect with a WPS PIN
1
Open the application list and select
2
Select a network indicated as WPS available under
networks
3
Enter a password for the network
select
4
On the access point, enter the PIN and press the start
button.
→ WPS push button.
→ WPS PIN entry.
Settings
Settings
→
Settings
→
Connectivity
133
→ Wi-Fi
→ Wi-Fi.
Connect, and then
→ Wi-Fi.
Connect, and then
→
Wi-Fi
Wi-Fi