Table of Contents
Advertisement
Using the Objects command
To check data consistency using the Objects command
From the Management Menu, select Objects, and then select Virtual Drive
1.
from the sub-menu.
2.
Use the arrow keys to select the virtual drive you want to check, and then
press <Enter>.
Select Check Consistency from the pop-up menu, and then press <Enter>.
3.
When prompted, use the arrow keys to select Yes from the dialog box to
4.
check the drive.
5.
When checking is complete, press any key to continue.
ASUS Z8PE-D18
5-21
Advertisement
Table of Contents
