Removing The Battery - Intel D945GCLF2 - Desktop Board With Integrated Atom Processor Motherboard Product Manual
Product guide
Hide thumbs
Also See for D945GCLF2 - Desktop Board With Integrated Atom Processor Motherboard:
- Technical product specification (86 pages) ,
- Product manual (58 pages) ,
- Technical product specification (84 pages)
Table of Contents
Advertisement
To replace the battery, follow these steps:
1. Observe the precautions in "Before You Begin" (see page 21).
2. Turn off all peripheral devices connected to the computer. Disconnect the
computer's power cord from the AC power source (wall outlet or power adapter).
3. Remove the computer cover.
4. Locate the battery on the board (see Figure 15).
5. Push the battery retention clip aside and remove the battery from the connector as
shown in Figure 15. Note the orientation of the "+" and "-" on the battery.
6. Install the new battery in the connector, making sure to orient the "+" and "-"
correctly.
7. Replace the computer cover.
Installing and Replacing Desktop Board Components
Figure 15. Removing the Battery
41
- Quick Links:
- Processor
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the D945GCLF2 - Desktop Board With Integrated Atom Processor Motherboard and is the answer not in the manual?
Questions and answers