Documentation Changes - Intel D925XECV2 Specification

DOCUMENTATION CHANGES

The Documentation Changes listed in this section apply to the Intel
Technical Product Specification (Order Number C90152). All Documentation Changes will be
incorporated into a future version of that specification.
1. Change to Section 1.2, Table 1, Summary Of Board
Differences
Table 1 in Section 1.2 will be replaced in its entirety as follows:
Table 1. Summary of Board Differences
D925XECV2 • ATX Form Factor (12.00 inches by 9.60 inches [304.80
• Four PCI Conventional bus add-in card connectors
• Two PCI Express x1 bus add-in card connectors
• Auxiliary rear fan connector
• Option for auxiliary power output connector
• Option for SCSI hard drive indicator LED
• Option for Trusted Platform Module (TPM)
D925XEBC2 • microATX Form Factor (9.60 inches by 9.60 inches
• Two PCI Conventional bus add-in card connectors
• One PCI Express x1 bus add-in card connector
2. Change to Section 1.3.1, Table 2, Feature Summary
Table 2 in Section 1.3.1 will be replaced in its entirety as follows:
Table 2. Feature Summary
Form Factor
Processor
®
Intel Desktop Board D925XECV2 Specification Update
millimeters by 243.84 millimeters])
[243.84 millimeters by 243.84 millimeters])
• D925XECV2: ATX (12.00 inches by 9.60 inches [304.80
millimeters by 243.84 millimeters])
• D925XEBC2: microATX (9.60 inches by 9.60 inches
[243.84 millimeters by 243.84 millimeters])
Support for an Intel Pentium
®
socket with a 1066, 800, or 533 MHz system bus
®
Desktop Board D925XECV2
4 processor in an LGA775
®
continued
7