Use Only For Intended Applications; Installing The I/O Shield - Intel D915PLWD Product Manual

Desktop board

Hide thumbs Also See for D915PLWD:

Table of Contents

Intel Desktop Board D915PLWD Product Guide

Use Only for Intended Applications

All Intel desktop boards are evaluated as Information Technology Equipment (I.T.E.) for use in

personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar

locations. The suitability of this product for other PC or embedded non-PC applications or other

environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported

without further evaluation by Intel.

The desktop board comes with an I/O shield. When installed in the chassis, the shield blocks radio

frequency transmissions, protects internal components from dust and foreign objects, and promotes

correct airflow within the chassis.

Install the I/O shield before installing the desktop board in the chassis. Place the shield inside the

chassis as shown in Figure 4. Press the shield into place so that it fits tightly and securely. If the

shield doesn't fit, obtain a properly-sized shield from the chassis supplier.

Figure 4. Installing the I/O Shield

OM16841

Table of Contents