Samsung BD-F7500 User Manual page 24

Settings
Audio
24
|
English
You can enjoy multichannel sound via HDMI output from
dTS Neo:6 Mode
a 2 channel audio source.
In some cases when the product is connected to a
digital TV, the audio signal may not synchronize with the
video signal. If this occurs, adjust the audio delay time
to match the video signal.
• You can set the audio delay time between 0 msec
Audio Sync
| NOTES |
\ The audio delay time you specify may not be exact depending
Set HDMI audio to output through HDMI1 or HDMI2.
 Auto : Audio output will be set automatically based
HdMI Audio Output
 HdMI1 : Audio will output to the device connected to
 HdMI2 : Audio will output to the device connected to
Lets you select the kind, size, and number of speakers
you have attached to your player, adjust the following
speaker settings for the speakers attached, and turn the
test tone on and off so you can test the speakers.
 Size : Lets you select the size of each kind of
Speaker Settings  Level : Lets you adjust the relative loudness of each
 distance : Lets you adjust the relative distance of
 Test Tone : Lets you run the Test Tone function so
and 200 msec.
Adjust it to the optimal setting.
on the played content.
on the devices connected to HDMI1 and HDMI2.
HDMI1.
HDMI2.
attached speaker - Large or Small - or indicate that
you don't have a particular kind of speaker attached
by selecting None. If you select None for a kind of
speaker, that kind of speaker will be grayed out on
the Level and Distance screens.
speaker from 6db to -6db. For example, if you like
deep bass, you can increase the loudness of the
subwoofer by 6db.
each speaker from the listening position up to 30 feet.
The farther the distance, the louder the speaker will
be.
you can test your adjustments. Setting Test Tone to
On turns the Test Tone on. Setting it to Off turns it off.