Listening To Radio; Using The Tv Sound Button On The Remote Control; Setting Mono/Stereo; Presetting Stations - Samsung HT-F4500 User Manual

Media Play

Listening to Radio

Using Buttons on the Remote Control
Press the FUNCTION button to select FM.
1.
2. Tune in to the desired station.
• Preset Tuning 1 : Press the 5 button to select
PRESET and then press the TUNING UP,
DOWN button to select the preset station.
- Before you can tune to preset stations, you
must add preset stations to the product's
memory. See Presetting Stations below.
• Manual Tuning : Press the 5 button to select
MANUAL and then press the TUNING UP,
DOWN button to tune in to a lower or higher
frequency.
• Automatic Tuning : Press the 5 button to select
MANUAL and then press and hold the TUNING
UP, DOWN button to automatically search the
band.

Setting Mono/Stereo

Press the MO/ST button.
• Each time you press the button, the sound switches
between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory.
Press the FUNCTION button to select FM.
1.
2. Press the TUNING UP, DOWN button to select
<89.10>.
Press the TUNER MEMORY button.
3.
• NUMBER flashes on the display.
4. Press the TUNER MEMORY button again.
• Press the TUNER MEMORY button before
NUMBER disappears from the display on its own.
• After you press the TUNER MEMORY button,
NUMBER disappears from the display and the
station is stored in memory.
5. To preset another station, repeat steps 2 to 4.
• To tune in to a preset station, press the TUNING
UP, DOWN button.
26
|
English
Using the TV SOUND Button on
the Remote Control
If you have a TV that supports Anynet+ (HDMI-CEC), the
TV SOUND button lets you direct the TV's audio to the
Home Theater Speakers or the TV Speakers. To use,
follow these steps:
1. Connect an HDMI cable to the TV and home
theater. (See page 14.)
Set Anynet+ (HDMI-CEC) On in the home theater
2.
and TV.
3. Press the TV SOUND button on the remote control.
TV SOUND ON flashes on the display on the front
panel, and then changes to D. IN.
• When TV SOUND is on, TV audio outputs through
the Home Theater speakers.
Press the TV SOUND button again to turn TV
4.
SOUND off.
• When TV SOUND is off, TV audio outputs through
the speakers of the connected Anynet+ TV.
K
Use TV SOUND:
1) When you want to listen to the TV's audio through
the home theater speakers.
2) When you want to listen to the audio from a USB
device plugged into the TV through the home
theater speakers.
K
TV SOUND ON/OFF support specification
Anynet+
Connected TV (HDMI-CEC)
Setting
Anynet+ ON
(HDMI-CEC)
supported TV OFF
Anynet+
(HDMI-CEC) not No operation
supported TV
TV TV
Sound Sound
ON OFF
O O
O X
O X