Bios Configuration Jumper; Front Panel Audio Header/Jumper Block; Jumper Settings For The Bios Setup Program Modes - Intel D201GLY - Desktop Board Motherboard Product Manual

Table 7 describes the two configurations of this header/jumper block.
Table 7. Front Panel Audio Header/Jumper Block
Jumper
Setting
NOTE
When the jumpers are removed and this header is used for front panel audio, the back
panel audio line out and mic-in connectors are disabled.

BIOS Configuration Jumper

The three-pin BIOS jumper block enables all board configuration to be done in the
BIOS Setup program. Table 8 shows the jumper settings for the Setup program
modes.
Figure 13, B shows the location of the Desktop Board's BIOS configuration jumper
block.
Table 8. Jumper Settings for the BIOS Setup Program Modes
Jumper
Setting
Installing and Replacing Desktop Board Components
Configuration
Audio line out and mic-in signals are routed to the back panel
5 and 6
connectors. The back panel audio connectors are shown in
Figure 2.
9 and 10
No Table 4 lists the names of the signals available on this connector
jumpers when no jumpers are installed.
installed
Mode
Normal (default) (1-2)
Configure (2-3)
Recovery (None)
Description
The BIOS uses the current configuration and
passwords for booting.
After the Power-On Self-Test (POST) runs, the
BIOS displays the Maintenance Menu. Use this
menu to clear passwords.
The BIOS recovers data from a recovery diskette
in the event of a failed BIOS update.
35