Table of Contents
Advertisement
3.
Marvell
Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_E1/E2 [navy blue])
®
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0
Gb/s signal cables.
•
•
•
2-24
The SATA6G_E1/E2 (navy blue) connectors are for data drives only. ATAPI device is
not supported.
®
You must install Windows
hard disk drives.
When using NCQ, set the Marvell Storage Controller item in the BIOS to [Enabled].
Refer to section 3.5.6 Onboard Devices Configuration for details.
XP Service Pack 3 or later versions before using Serial ATA
Chapter 2: Hardware information
- Quick Links:
- Motherboard Layout
- Product Layout
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the P8P67 PRO and is the answer not in the manual?