Using the LAN MAC EEPROM Utility
In Windows OS, copy the following LAN MAC Tools to a bootable USB HDD device:
1.
•
EEPROM.EXE (This is the writing tool of EEPROM)
•
MAC.BAT (This is the batch file for writing MAC value)
•
MAC.CFG (This is the configuration and data file for EEPROM.exe)
Use a text editor (e.g. Notepad) to open MAC.CFG.
2.
The file content is shown below. If necessary, modify the data.
•
WriteData='001122334455'
•
StartAddr=7A
•
WriteLeng=6
•
KeepByte=0
System Utilities
Figure 2:30. Copying LAN MAC Tools
Figure 2:31. Opening Text Editor
Figure 2:32. LAN MAC Values
2-22