Safety Instructions - Furuno WS-200 Operator's Manual

SAFETY INSTRUCTIONS

The operator of this equipment must read these safety instructions before attempting to
operate the equipment.
WARNING
CAUTION
Warning, Caution
WARNING
The input voltage must be 12 VDC.
Any other input voltage will damage the
equipment.
Always wear safety goggles and a
dust mask when installing to avoid
personal injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
Prohibitive Action
ii
Mandatory Action
CAUTION
Do not disassemble the unit.
Disasembling the unit will damage
the waterproof seal. Further, there are
no user-serviceable parts inside.
GPS position and velocity accuracies
are controlled by the U.S. Department
of Defense. Therefore, the position
accuracy described in the specifi-
cations cannot be guaranteed.
No one navigation device should ever
be solely relied upon for the navi-
gation of a vessel.
Always confirm position against all
available aids to navigation, for safety of
vessel and crew.
The compass safe distance for
standard and steering compasses is
0.30 m.
Observe this distance to prevent
inteference to a magnetic compass.