Settings For Navnet Vx2 - Furuno WS-200 Operator's Manual

2.3 Settings for NavNet vx2

The following items in the NavNet vx2 menu are applicable to the
WS-200. For details and operating procedure, see the Installation Manual for your
NavNet vx2 model.
NAV SETUP menu
Set POSITION SOURCE to GPS or ALL.
GPS SETUP menu
• GEODETIC DATUM
Select your chart type. WGS-84 is the GPS standard.
• ANTENNA HEIGHT
Set the height of the Weather Station above the sea surface.
• FIX MODE
Select position fixing mode from 2D (three satellites in view) or 2D/3D (three or
four satellites in view).
• COLD START
Clear the Almanac currently stored in the built-in GPS receiver to receive the
latest Almanac.
WAAS SETUP menu
• WAAS MODE
Select ON to use the WAAS mode.
• WAAS SEARCH
Select WAAS satellite search method, automatic or manual.
• CORRECTIONS DATA
Select the type of message for WAAS connection, 00 for North America, 02 for
elsewhere.
WAAS settings effective from the program version numbers shown below.
C-MAP specifications
Program No.
1950026-03.02
1950024-03.02
1950028-03.02
Model
Model 1804C-BB
Model 1804C
Model 1704C
NAVIO specifications
Program No.
1950025-03.02
1950023-03.02
1950027-03.02
10
Model
Model 1804C-BB
Model 1804C
Model 1704C