Canon PowerShot A410 Software Starter Manual page 76

72
Converting RAW Images
4
Click the
and destination, and then click [Save].
Selects the images for saving with these
settings.
Select a file type
Set the file destination
You can also change the file name
This will convert the image.
5
Click in the Main Window.
Functions of the Image Quality Adjustment Window
The following adjustments can be made in the Image Quality Adjustment Window. The
available settings may vary depending on the camera used.
This section adjusts the
white balance according
to the light source and
color temperature.
This section adjusts the
digital exposure
compensation, photo
effect, contrast,
sharpness, and saturation.
Restores all settings to the
settings stored in the
camera at the time of
shooting.
The effect of the settings
above can be viewed
immediately if you place a
check mark here.
You can change the coloration of the image to your preferred settings when
you convert a RAW image. You can also select preset color schemes, such as
Positive Film. Furthermore, you can add your own color schemes (My Color) to
apply to other RAW images when they are being converted. See the PDF
manual for ImageBrowser for more information (p. 2).
(Save) icon, set the file type
Tone Curve Tab
You can set the levels for
the RGB channels
separately or together.
Advanced Adjustments
Tab
You can set the settings
for adaptive noise
control and the color
space for the output.
Click the arrow to
display the tab.
If you cannot set the
desired setting with the
slider on the left,
directly enter the setting
here.
Applies the settings to
the displayed image