A list of authorized resellers can dangerous voltage inside the moving the cart/apparatus be found on BEHRINGER’ s website behringer. com under enclosure - voltage that may be suffi cient to constitute a combination to avoid “Where to Buy”, or you can contact the MUSIC Group offi ce risk of shock.
MULTICOM PRO-XL MDX4600/PRO-XL MDX2600/AUTOCOM PRO-XL MDX1600 User Manual • connection or operation of the unit in any way “Support” at behringer. com. If your country is not (3) This warranty does not detract from the seller’ s listed, please check if your problem can be dealt with...
Owing to state-of-the-art semi-conductor technology, there is no sound deterioration caused by tube ageing, there are The new PRO-XL dynamics processors from BEHRINGER feature several innovative no heat problems and no maintenance required at all. All that remains is the circuit designs, making them top-class dynamics processing equipment.
The serial a short release time (switch not pressed). The long release time is the best number is printed on the top side of the unit. Or register online at behringer.com. choice for slowly decaying or heavily reverberated signals (switch pressed).
MULTICOM PRO-XL MDX4600/PRO-XL MDX2600/AUTOCOM PRO-XL MDX1600 User Manual Application hints (6) Use the THRESHOLD control to adjust the compressor threshold from -40 to +20 dB. The purpose of using an expander is usually to expand the usable dynamics towards the lower end, i.e. to improve the separation between low-level signals (7) These three LEDs (AUTOCOM PRO-XL and COMPOSER PRO-XL only) indicate and the unavoidable noise floor by reducing the noise level.
MULTICOM PRO-XL MDX4600/PRO-XL MDX2600/AUTOCOM PRO-XL MDX1600 User Manual (18) The OUTPUT control allows you to raise or lower the output signal by If the compressor is being used as a limiter, the attack time should be as short as max. 20 dB, so as to make up for a gain loss caused by the compressor or possible.
MULTICOM PRO-XL MDX4600/PRO-XL MDX2600/AUTOCOM PRO-XL MDX1600 User Manual (26) DE-ESSER LEVEL (MDX2600). The LED chain reads the current attenuation within a range from +3 to +12 dB. (27) MALE switch. This switch adapts the de-esser to the male (switch pressed) or female registers (not pressed).
If you wish to use the dynamics processor as part of a P.A. system integrating rhythm instruments after recording. Only the expander/gate section is required, an active frequency crossover (e.g. BEHRINGER SUPER-X PRO CX2310), you can the compressor and/or peak limiter remain disabled. Insert the bass guitar track...
MULTICOM PRO-XL MDX4600/PRO-XL MDX2600/AUTOCOM PRO-XL MDX1600 User Manual 6. Specifications Audio Inputs Expander/Gate Section Type XLR and 1/4" TRS connectors, Type IRC (Interactive Ratio Control) expander HF-shielded, servo-balanced Threshold variable (OFF to +10 dB) Impedance Ratio variable (1:1 to 1:8) +4 dBu 90 kW bal., 45 kW unbal.
Page 13
Shipping weight approx. 7.5 lbs / 3.4 kg BEHRINGER makes every effort to ensure the highest standard of quality. Necessary modifications are carried out without notice. Thus, the specifications and design of the device may differ from the information given in...
Page 14
MULTICOM PRO-XL MDX4600/PRO-XL MDX2600/AUTOCOM PRO-XL MDX1600 User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION MULTICOM PRO-XL MDX4600/PRO-XL MDX2600/AUTOCOM PRO-XL MDX1600 MUSIC Group Services US Inc. Responsible Party Name: 18912 North Creek Parkway, Address: Suite 200 Bothell, WA 98011, Phone: +1 425 672 0816 Phone/Fax No.: Fax: +1 425 673 7647 MULTICOM PRO-XL MDX4600/PRO-XL MDX2600/...