Toshiba P1710A User Manual page 10

Menu Value
Brightness 0~100
Contrast 0~100
Sharpness(*) 0~100
Hue 0~100
Color(*) 0~100
Display Mode Full, 4:3, 16:9, Over, Under, 1:1 Adjust the display scan mode
Color Temp. Warm/Cool/User
Color Temp R 0~100
Color Temp G 0~100
Color Temp B 0~100
(2) AV, AV1 – Setup
OSD H Position
OSD V Position
OSD Time out
Volume
Language
Back Light
N.R.
PIP Set
Picture
* Above items and value are subject to change without notice *
Note: This setup is the same as VGA / DVI - Setup tab on page 15.
17
Definition of functions
Adjust luminance level of the screen image
Adjust contrast level of the screen image
Adjust the sharpness of the screen image
Adjust the hue of color of the screen image
(NTSC video only)
Adjust the saturation of color of the screen image
Push [+] or [−] button to choose the color
temperature
Adjust color value of Red of the screen image
Adjust color value of Green of the screen image
Adjust color value of Blue of the screen image
< >
50
< >
82
< >
60
< >
50
< >
English
< >
High
< >
Middle
>
Setup
(3) PIP mode Setup
Source
Multi Picture
PIP Position
PIP Swap
Setup / PIP Set
* Above items and value are subject to change without notice *
Menu Value
Source (1)
None, Small, Middle, Large, POP
Multi picture
(2)
PIP Position PIP Position 1, 2, 3, 4, and 5 (3)
PIP Swap
(1) For this selection, there will be a difference in the source value you selected on the main screen.
Note: If you select composite video on the main screen, you cannot select other composite video on the
PIP screen.
(2) None: PIP mode OFF
Small: Full width at fifth maximum
Middle: Full width at fourth maximum
Large: Full width at third maximum
POP: Split screen
(3) Position 1: Upper left
Position 2: Lower left
Position 3: Middle
Position 4: Upper right
Position 5: Lower right
Note: When PIP window is shown, if you select VGA input, the auto adjust doesn't work.
< >
VGA
< >
Small
< >
PIP Position 1
>
Definition of functions
Push [+] or [−] switch to select the source on sub
screen
Push [+] or [−] to select the PIP mode and size of
PIP screen
Push [+] or [−] to select the position of PIP
screen
Under PIP mode, push [+] to swap main screen
for PIP screen
18