Table of Contents
Advertisement
Operation
7
REMOTE BASS BOOST KNOB
Mounting and Installation
1. Using the screws provided with the kit, find a location under the dash, center console,
or a place that gives easy access to the remote bass boost knob.
2. Plug in the supplied cord into the back of the bass boost knob.
Adjusting the Gain
To adjust the gain setting, first turn the amplifier gain all the way down. Then turn the
source volume up until distortion is audible, and then turn it down until distortion is inaudi-
ble. Next, turn the amplifier gain setting until once again distortion is audible, and then back
it down until distortion is inaudible.
Adjusting the Crossover
Turn the crossover adjustment all the way down to 40Hz. Then slowly turn the knob up
untill desired sound is achieved. Normal listening level should be right around 100Hz to
150Hz. Use common sense when adjusting your crossover.
Hide quick links:
Advertisement
Table of Contents
