Terminals - AudioBahn ABB122J Owner's Manual

TERMINALS

5
The box can be wired in 1) a stereo configuration (each sub wired to a different channel)
or 2) a mono configuration (both subs wired together to a single channel of an amp, or
two bridged channels of an amp). Looking at the back of the box you will see each side's
terminals. The left terminal is negative (-) and the right terminal is positive (+) for each set.
If wiring in stereo mode, you will have a 4 ohm stereo load. If you wire the subs together in
mono mode, you will see a 2 ohm load if wiring in parallel, and an 8 ohm load if wiring in
series. Please see the Tech Tips section of this manual for wiring diagrams.