Advertisement
Issue:
VDS provider for MSA does not refresh after volume creation fails
Description
Workaround
Issue:
Storage Manager for SAN stops responding when Subsystem is selected
Description
Workaround
System installation and recovery process
This section describes issues related to installing the operating system on a storage server or performing
the recovery process.
After restoring the system with the System Installation and Recovery DVD, the data drive may be
Issue:
seen by Windows as a foreign disk
Description
Workaround
Warning message is displayed during system recovery of ProLiant Storage Servers running
Issue:
WUDSS
Description
Workaround
Effective date
September 15, 2008
6
Additional applications and utilities
Creating a LUN and volume using the Create a New LUN wizard using Storage
Manager for SAN results in the volume creation failing and displays a warning
icon on the created volume in the Storage Manager for SAN user interface.
The warning icon continues to display even after closing and re-opening the HP
Storage Server Management console. Attempting to delete the LUN results in the
Storage Manager for SAN user interface becoming unresponsive and unable to
proceed past the delete LUN dialog box.
Do one of the following:
•
Restart the system to load the LUNs and to refresh Storage Manager for SAN.
•
Use the Array Configuration Utility (ACU) to create the LUN on the MSA, and
then use the Disk Manager utility on the Windows storage server to create
the LUN volume.
When Subsystem is clicked in Storage Manager for SAN, the system stops
responding and displays the message MMC has detected an error in a
snap-in and will unload it. This behavior is seen only when any of the
MSA subsystem volumes are being expanded.
Use the Array Configuration Utility (ACU) to access the MSA subsystem when
volumes are being expanded.
System installation and recovery process
If the data drive was a dynamic disk prior to performing a system recovery, the
disk may be designated as a foreign disk by Windows after the recovery. This
issue is seen in the Disk Management MMC snap-in.
Open the Disk Management snap-in. Right-click on the foreign disk and select
Import disk.
When finalizing installation during the system recovery process on HP ProLiant
Storage Servers with Microsoft® Windows® Unified Data Storage Server 2003,
the following Service Control Manager error message is displayed: At least one
service or driver failed during system startup. Use Event Viewer to examine the
event log for details.
This error message can be ignored. Click OK to dismiss the error message. When
the system recovery process completes and the server restarts, the failing service
(Subsystem for UNIX-based Applications, or SUA) will start.
Advertisement
