Projection; The Image And Sound For Movies In Easymp Network Projection Are Not Displayed, The Image Is Slow To Appear, Or Either The Video Or Audio Stop" S; No Audio From The Projector When Connecting With Easymp Network Projection - Epson PowerLite Pro G5650WNL Operation Manual

Troubleshooting
The image and sound for movies in EasyMP Network Projection are not displayed, the image is slow to appear, or either the
video or audio stop
Check
Did you try to play back movies with Media Player or try to
operate the screen saver preview?
Is WEP encryption enabled, or are multiple projectors
connected?
Have you enabled DHCP?
Was EasyMP Network Projection started while a movie
was playing, or were the resolution and color number
changed?
For Macintosh
Is Wireless LAN 802.11b/g being used in Quick Connection
Mode?
Are you using a computer that does not meet the
recommended specifications?

No audio from the projector when connecting with EasyMP Network Projection

Check
Are multiple projectors connected to one computer?
Is audio set to output from the computer in Set Options?
Depending on the computer, the movie playback screen in Media Player may not be displayed, and
the screen saver preview may not be displayed normally.
The display speed decreases when WEP encryption is enabled or multiple projectors are connected.
When DHCP is set to On in Advanced Connection Mode, if an available DHCP server is not found it
may take some time to enter LAN standby status.
When playing back movies, start EasyMP Network Projection first before starting play back. If EasyMP
Network Projection is started during movie play back and the display screen resolution and color
number are changed, try moving the movie playback window, minimizing it, or resizing it.
There are times when the image and sound for movies may stop due to interference. When using the
movie sending function, use Advanced Connection Mode or Wireless LAN 802.11a in Quick
Connection Mode.
When using a computer that does not meet the recommended specifications, images and audio for
movies may stop. s "Software Requirements"
Audio can only be transferred to one projector. Disconnect the current connections and connect only
one projector on the connection screen.
Select Output audio from the projector on the Set options Audio Output tab.s
Remedy
p.8
Remedy
52
p.43