Epson PowerLite Pro G5650WNL Operation Manual page 17

Connecting to a Projector on a Network and Projecting
C
Status
The following six icons indicate the status of the detected projectors.
Standby
Busy
Busy (Disable
interrupt
connection)
Currently in
use by
another
application
Searching
Not found.
D
Projector name
The projector's name is displayed.
E
Disable interrupt connection
Check the box to prevent an interrupt connection by other computers
while connected to the selected projector.
F
Use multi-display
Check the box to use the Multi-screen display function. When this is
selected, Display layout and Display properties are displayed at the
bottom of the screen. s
Select for connecting.
Select for connecting. When you click
Connect, the computer currently
connected is disconnected and your
computer is connected.
Cannot be selected. Disable
interrupt connection is set on
another computer which is already
connected.
Cannot be selected. The projector's
network setting display is open. Or,
another projector application is using
the projector.
Displayed while running Manual
search or Profile.
Displayed when a projector cannot be
found as a result of Manual search or
Profile.
p.26
G
Troubleshooting
If there is a problem and you cannot have a connection, press this
button to open the EasyMP Network Projection Troubleshooting
screen.
H
Connect
Connect to the projector you selected from the search results list.
When a connection is made with a projector, a toolbar is displayed.
I
Set options
You can make general setting options such as the processing method
when starting up EasyMP Network Projection. For Set options, see
p.41
s
J
Save in the profile
Saves the results of a network projector search as a Profile. s
K
Clear list
Deletes all search results.
L
IP address (Advanced Connection Mode only)
The projector's IP address is displayed.
M
Display
Select the number displayed (when Use multi-display is selected). s
p.33
N
Profile
You can search for a projector on the network using a Profile
saved using Save in the profile. s
O
SSID (Quick Connection Mode only)
The projector's SSID is displayed. If the SSID Auto Setting is set to On
in the projector's Network menu, Automatic will be displayed before
the SSID.
The currently detected SSID will be displayed grayed out.
17
p.37
p.36