2.
Press the load lever with your thumb
(A), then move it to the left (B) until it is
released from the retention tab.
To prevent damage to the socket pins,
do not remove the PnP cap unless
you are installing a CPU.
3.
Lift the load lever in the direction of the
arrow to a 135º angle.
4.
Lift the load plate with your thumb and
forefinger to a 100º angle.
5.
Remove the PnP cap from the CPU
socket.
2-6
Retention tab
A
B
Load lever
Load plate
4
PnP cap
Chapter 2: Hardware information
3