Verify Mirror Disk - ASROCK P4VM900-SATA2 Installation Manual
Raid installation guide
Hide thumbs
Also See for P4VM900-SATA2:
- User manual (44 pages) ,
- Installation manual (114 pages) ,
- User manual (45 pages)
Table of Contents
Advertisement
2.1.4
Verify Mirror Disk
Data on the mirror disk must be the same as its corresponding source disk to provide fault tolerance for RAID 1.
1.
Select a RAID 1. Right-click the selected RAID, and then a shortcut menu will appear. Click "Verify Mirror" to verify whether the source and
the mirror disks are identical.
2.
After executing "verify mirror" command, a dialog will show the verifying process. You can pause or cancel this process at any time. The
process may take a long time if the capacity of RAID is large.
3
When the mirror disk is not identical with the corresponding source disk, the mirror disk will be marked with a "need-sync" icon:
14
. A
Advertisement
Table of Contents
