Table of Contents
Advertisement
3.1.2
ASUS EZ Flash 2 utility
The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use
a bootable floppy disk or an OS-based utility.
Before you start using this utility, download the latest BIOS from the ASUS
website at www.asus.com.
To update the BIOS using EZ Flash 2
1.
Insert the USB flash drive that contains the latest BIOS file to the USB port,
and then launch EZ Flash 2 in any of these two ways:
•
Press <Alt> + <F2> during POST to display the following.
Enter the BIOS setup program. Go to the Tools menu to select EZ Flash
•
2 and press <Enter> to enable it.
FLASH TYPE:
BOARD:
VER:
DATE:
PATH:
A:
Note
[Enter] Select or Load
[Up/Down/Home/End] Move
2.
Press <Tab> to switch between drives until the correct BIOS file is
found. When found, EZ Flash 2 performs the BIOS update process and
automatically reboots the system when done.
•
•
Ensure to load the BIOS default settings to ensure system compatibility and
stability. Select the Load Setup Defaults item under the Exit menu. Refer to
section 3.9 Exit Menu for details.
3-4
ASUSTek EZ Flash 2 BIOS ROM Utility V3.38
MXIC 25L1605A
Current ROM
P6TD DELUXE
0103
07/09/2009
A:\
[Tab] Switch
[B] Backup
This function can support devices such as a USB flash drive with FAT 32/16
format and single partition only.
DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
Update ROM
BOARD:
Unknown
VER:
Unknown
DATE:
Unknown
[V] Drive Info
[Esc] Exit
Chapter 3: BIOS setup
Hide quick links:
Advertisement
Table of Contents
