Asus P5WD2 Installation Manual page 133

Creating a RAID 0 set (striped) Creating a RAID 0 set (striped) Creating a RAID 0 set (striped) Creating a RAID 0 set (striped) Creating a RAID 0 set (striped)
To create a RAID 0 set:
1. From the utility main menu, select 1 . C r e a t e R A I D V o l u m e
press <Enter>. This screen appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
↑↓ ↑↓ ↑↓ ↑↓]-Change
[↑↓
2. Enter a name for the RAID 0 set, then press <Enter>.
R A I D L e v e l R A I D L e v e l
3. When the R A I D L e v e l R A I D L e v e l R A I D L e v e l item is highlighted, press the up/down arrow
key to select R A I D 0 ( S t r i p e ) R A I D 0 ( S t r i p e ), then press <Enter>. R A I D 0 ( S t r i p e ) R A I D 0 ( S t r i p e )
R A I D 0 ( S t r i p e )
D i s k s D i s k s
4. When the D i s k s D i s k s item is highlighted, press <Enter> to select the hard D i s k s
disk drives to configure as RAID. This pop-up screen appears.
Port Drive Model
0 XXXXXXXXXXXX
1 XXXXXXXXXXXX
2 XXXXXXXXXXXX
3 XXXXXXXXXXXX
Select 2 to 4 disks to use in creating the volume.
↑↓ ↑↓ ↑↓ ↑↓]-Previous/Next
[↑↓
5. Use the up/down arrow key to highlight a drive, then press <Space>
to select. A small triangle marks the selected drive. Press <Enter>
after completing your selection.
A S U S P 5 W D 2 A S U S P 5 W D 2 A S U S P 5 W D 2
A S U S P 5 W D 2 A S U S P 5 W D 2
1 . C r e a t e R A I D V o l u m e 1 . C r e a t e R A I D V o l u m e, then 1 . C r e a t e R A I D V o l u m e
1 . C r e a t e R A I D V o l u m e
[ CREATE ARRAY MENU
Name: Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 0.0 GB
Create Volume
[ DISK/VOLUME INFORMATION
cannot contain special characters.
[TAB]-Next [ESC]-Previous Menu
[ SELECT DISKS
Serial #
XXXXXXXX
XXXXXXXX
XXXXXXXX
XXXXXXXX
[SPACE]-Selects
]
]
[Enter]-Select
]
Size Status
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
XX.XGB Non-RAID Disk
[ENTER]-Selection Complete
5 - 1 9 5 - 1 9 5 - 1 9
5 - 1 9 5 - 1 9