Asus P5V-X SE User Manual page 42

3. Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s
hard disk drives.
If you installed Serial ATA hard disk drives, you can can create a RAID 0,
RAID 1, and JBOD configuration through the onboard VIA VT8237A RAID
controller.
P5V-X SE SATA Connectors
Important notes on Serial ATA
•
•
•
1-30
SATA1
The Serial ATA RAID feature (RAID 0, RAID 1, and JBOD) is available only
if you are using Windows
Install the Windows 2000 Service Pack 4, the Windows
®
Pack1 or later version before using Serial ATA.
Please refer to section "Onboard Devices Configuration" in the BIOS for
details on SATA RAID configuration.
SATA2
2000/2003 Server/XP/Vista operation system.
®
Chapter 1: Product introduction
XP Service
®