Setting Up The Client Mode - Asus P5Q3 Deluxe WiFi-AP n User Manual

3.3.4

Setting up the Client Mode

In Client Mode, you can connect to the LAN or Internet, or both, through a wireless
AP. Refer to the Mode Indicator on the top-right corner of the main window to
know which mode WiFi-AP @n is in. If WiFi-AP @n is in AP Mode, click the Mode
Switch key to switch to Client Mode.
Link Status page
You can check out the basic
information of the WiFi-AP @n,
including Status, SSID, Channel,
BSSID, Network type, Authentication,
Encryption, Link Speed, Link Quality,
and Signal Strength.
Statistics page
This page shows the statistics
records of both transmitted and
received data packages. You can
clear the record by clicking Reset
Counters.
About page
You can check out the utility details,
including driver version and date,
utility version and date, EEPROM
version, and firmware version. You
can also connect to www.asus.com
for product information.
Radio On/Off key
You can enable or disable the
connectivity of WiFi-AP @n with a
single click. When the radio is off, all
buttons are disabled, and the links
with other wireless network nodes are
disconnected.
3-14 Chapter 3: Setting up