Table of Contents
Advertisement
3.2.1
Setting up the AP Mode
1.
To launch the WiFi-AP @n setup wizard,
right-click the system tray icon
select Wizard.
2.
Select Create a wireless access
point and click Next.
3.
The system automatically generates
an SSID for the AP mode. You can
rename the SSID, if desired.
4.
Select a Network Security level for
your AP mode. The configurable
options are None, WEP, WPA-
Personal, and WPA2-Personal.
Refer to section 3.5 for detailed
security information. Select an
appropriate level and click Next.
If you select WEP, WPA-Personal or
5.
WPA2-Personal in Step 4, you are
required to input a password. Follow
the wizard guidelines for key entry
rules. Click Next to continue.
3-4
and
Chapter 3: Setting up
Advertisement
Table of Contents
