Asus P5Q3 - Motherboard - ATX User Manual page 148

Configuring EZ Backup / Super Speed
EZ Backup / Super Speed might erase all original data in both hard disks.
Ensure that you have back up all your data in your hard disks before using the
Drive Xpert function.
To start EZ Backup / Super Speed configuration:
Click Drive Xpert Configuration
1.
button.
Click EZ Backup / Super Speed from
2.
the Drive Xpert Configuration screen.
Click Apply to start configuration.
3.
A password confirmation window
appears if you have set up the
password for mode change. If
you forgot the password, you
have to do mode change in BIOS
setup environment.
4. Follow the onscreen instructions to complete the configuration.
5. The Drive Xpert icon on the Windows
notification area turns green to indicate that EZ
Backup / Super Speed is set up successfully.
Drive Xpert icon indications
Display status
Green
Yellow
Gray
Red
Changing to Normal Mode
This mode allows you to disable the Drive Xpert function and use the two SATA
connectors as onboard SATA connectors.
To change to Normal Mode:
1. Click Normal Mode from the Drive
Xpert Configuration screen.
2. Click Apply to start configuration.
3. Follow the onscreen instructions to
complete the configuration.
4-36
®
Description
Drive Xpert is set up successfully
Hard disk rebuilding
No hard disk detected
One hard disk is corrupt
Click to set up password
Chapter 4: Software support